# How to use the Pomodoro technique on a Mac

> Run 25 minute focus blocks with short breaks on a Mac using the Clock app and a Focus, and see when a dedicated Pomodoro timer is easier.

Canonical: https://www.notchstar.com/tips/pomodoro-technique-on-mac/
Last updated: 2026-11-04

Published 2026-11-04.

The Pomodoro technique is simple: work for a fixed block, usually 25 minutes, take a short break, and after four blocks take a longer one. On a Mac you can do this with the Clock app alone. Set a 25 minute timer for work and a 5 minute timer for the break. Apple's Clock guide does not describe a Pomodoro mode, so you start each phase yourself.

## Set it up with Clock

1. Open the Clock app and click **Timers**.
2. Click the **Add** button and choose **Presets** or **Custom Timer**. Make one timer of 25 minutes and name it "Focus".
3. Make a second timer of 5 minutes and name it "Break".
4. Give the two timers different sounds, so you know by ear which phase just ended.
5. Click **Start** on the focus timer, and work on one task only.

When the notification appears, click **Options** and choose **Stop**. Then start the break timer. Apple's guide says you can also choose **Repeat** to run the same timer again, which suits the focus block.

## Keep interruptions out

A block only works if it is not broken. Apple lets you create a Focus in System Settings that silences notifications, so messages do not pull you away. Open **System Settings**, click **Focus**, and choose a provided Focus or a custom one. The page [on silencing notifications while you work](https://www.notchstar.com/tips/focus-without-notifications-on-mac/) has the steps.

## The weak spot of the Clock approach

Clock treats each timer as a separate thing. It does not count your blocks, it does not know that a break follows work, and you have to click Start every time. For some people that is fine, because starting the next block is a small, deliberate act. Others lose the thread after the second block.

## A dedicated Pomodoro mode

NotchStar's [Timers tool](https://www.notchstar.com/features/timers/) has a Pomodoro mode with three fixed presets: 25 and 5 minutes, 50 and 10 minutes, and 15 and 3 minutes. Four dots show the sessions in a cycle, the label tells you whether you are on a focus or a break phase, and a skip button moves to the next phase. It keeps counting with the notch closed and ends with a sound you choose. The presets cannot be changed, timers reset when NotchStar quits, and there is no banner alert.

For more on block lengths and what to do when you are interrupted, read the [Pomodoro setup guide](https://www.notchstar.com/guides/pomodoro-timer-on-mac/).

## Quick answers.

### Does macOS have a built in Pomodoro timer?

Apple's Clock app has timers and a stopwatch, but the pages checked on 4 November 2026 do not describe a Pomodoro mode. You can run the technique with two timers.

## Keep reading.

- [Timer, stopwatch and Pomodoro in the notch](https://www.notchstar.com/features/timers/): A timer, stopwatch and Pomodoro with session tracking, always one hover away in the Mac notch. It keeps counting while the notch is closed.
- [How to run a Pomodoro timer on your Mac](https://www.notchstar.com/guides/pomodoro-timer-on-mac/): The Pomodoro technique in practice: block lengths, breaks, what to do when you get interrupted, and how to run it from the Mac notch.
- [How to set a timer on a Mac](https://www.notchstar.com/tips/how-to-set-a-timer-on-mac/): Open the Clock app, click Timers, set the time and click Start. Steps for pausing, naming and repeating timers, and what happens when your Mac sleeps.
- [How to stop notifications while you focus on a Mac](https://www.notchstar.com/tips/focus-without-notifications-on-mac/): Turn on Do Not Disturb in Control Center or create a Focus in System Settings, choose who and what can get through, and schedule it by time or app.
- [How to run more than one timer on a Mac](https://www.notchstar.com/tips/run-several-timers-on-mac/): Add timers in the Clock app with Custom Timer or Presets, name each one, give it a sound, and see all of them at once. Steps and limits.

## More in Timers and focus.

- [How to set a timer on a Mac](https://www.notchstar.com/tips/how-to-set-a-timer-on-mac/): Open the Clock app, click Timers, set the time and click Start. Steps for pausing, naming and repeating timers, and what happens when your Mac sleeps.
- [How to make a Mac stop playing music after a timer](https://www.notchstar.com/tips/stop-music-with-a-timer-on-mac/): Set a timer in the Clock app and choose Stop Playing in the When timer ends menu, so music or video stops on its own, for example before you sleep.
- [How to use a stopwatch on a Mac](https://www.notchstar.com/tips/use-stopwatch-on-mac/): Open Clock, click Stopwatch, press Start, Lap and Stop. Switch between digital and analog faces, and know that timing continues if the Mac sleeps.
- [How to run more than one timer on a Mac](https://www.notchstar.com/tips/run-several-timers-on-mac/): Add timers in the Clock app with Custom Timer or Presets, name each one, give it a sound, and see all of them at once. Steps and limits.
- [How to stop notifications while you focus on a Mac](https://www.notchstar.com/tips/focus-without-notifications-on-mac/): Turn on Do Not Disturb in Control Center or create a Focus in System Settings, choose who and what can get through, and schedule it by time or app.
- [How to open the Clock timer from the Mac menu bar](https://www.notchstar.com/tips/open-the-clock-timer-from-the-menu-bar-on-mac/): Click the time in the menu bar, then the Clock widget, to start a timer or stopwatch faster. Also how to keep a timer visible while you work.
